Filter Elements for Oil Mist, Emulsion Mist and Aerosols
Applications
- Oil spraying systems
- Machining centres
- Metal forming
- Minimal lubrication
Advantages
- Filter effi ciency ≤ 1 mg / m³ possible
- Highest storage capacity
- Long life time
- Lowest pressure loss
- Compact models
- Exchangeable pre-filter
Features
- Type: filter cartridges or filter cassettes
- All standard sizes and installation systems available
- Maximum operating temperature 80 °C
- Metall parts of galvanized steel
Filter Medium
- Multistage filter medium especially developed for the separation of liquid particles
- High storage capacity due to several filter levels
- Exchangeable pre-filter
- Efficiency of 99 % for particle sizes ranging from 1 to 2,5 μm
Special Types
- Temperature resistant up to 100 °C
- Metal parts of stainless steel
- Other individual types
Service
We advise you at the design of the filter elements.
Raw gas side installation with Tie rod | |||||
Ø E [mm] |
Length L [mm] |
Filter area [m²] |
Ø B [mm] |
Ø I [mm] |
Ø D [mm] |
390 | 633 | 9,5 | 13 | 216 | 300 |
390 | 1033 | 15,0 | 13 | 216 | 300 |
500 | 633 | 10,5 | 13 | 268 | 475 |
500 | 1033 | 18,0 | 13 | 268 | 475 |
Other sizes and models on request.
Technical changes reserved.